Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; RWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Chevrolet
Monte Carlo
Base Coupe 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; RWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Chevrolet
Monte Carlo
LS Coupe 2-Door
4.3L 262Cu. In. V6 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; RWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Chevrolet
Monte Carlo
LS Coupe 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; RWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Chevrolet
Monte Carlo
SS Coupe 2-Door
5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; RWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Coupe 2-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Coupe 2-Door
2.5L 2474CC 151Cu. In. l4 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Coupe 2-Door
3.0L 181Cu. In. V6 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Sedan 4-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Sedan 4-Door
2.5L 2474CC 151Cu. In. l4 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
Base Sedan 4-Door
3.0L 181Cu. In. V6 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Coupe 2-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Coupe 2-Door
2.5L 2474CC 151Cu. In. l4 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Coupe 2-Door
3.0L 181Cu. In. V6 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Sedan 4-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Sedan 4-Door
2.5L 2474CC 151Cu. In. l4 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
GT Sedan 4-Door
3.0L 181Cu. In. V6 GAS OHV Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
International Coupe 2-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
International Sedan 4-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
1988
Oldsmobile
Cutlass Calais
SL Coupe 2-Door
2.3L 138Cu. In. l4 GAS DOHC Naturally Aspirated
Note:This is a complete X pipe kit including special angled rear legs to accommodate angled mufflers found on many 78-88 G body GM cars & some Mopars.Pypes Perf Exhaust systems & accessories are fabricated using stainless steel materials that will provide their owners w/long term service & satisfaction & Pypes products are backed by our limited lifetime warranty!Features:Mandrel BentEnsures Maximum Flow Of Exhaust Gases Which Boosts AccelerationFabricated Using Highest Quality MaterialsResists Corrosion409 Stainless Reinforcement Plates At WeldsSpecial Angled Rear LegsAccommodates Angled Mufflers Found On Many 78-88 G bodyPipe Style: X-PipeMaterial: 409 Stainless SteelSold As: EachWarranty: Limited LifetimeThe front leg center to center is 21esThe rear leg center to center is 10esThe total length from front to rear is 40es; FWD
PartType:Exhaust Crossover Pipe
Mfrlabel:Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Quantity Required:1
Portions of the information contained in this table have been provided by shoptuckys
Item specifics
Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab
Type
Truck, Car
Item Length
34.750
UPC
846861005712
Brand
Pypes Performance Exhaust
Manufacturer Part Number
XGG10
About this product
Product Identifiers
Brand
Pypes Performance Exhaust
Manufacturer Part Number
XGG10
eBay Product ID (ePID)
253859759
Additional Product Features
Notes
Description--Exhaust X-Pipe Kit Intermediate Pipe 2.5 in Crossover Incl Special Angled Rear Legs Natural 409 Stainless Steel
Part Type
Exhaust and TAIL Pipes
Sub Type
Exhaust Crossover Pipe
Item description from the seller
Seller assumes all responsibility for this listing.
APO/FPO, Alaska/Hawaii, Barbados, French Guiana, French Polynesia, Guadeloupe, Libya, Martinique, New Caledonia, Reunion, Russian Federation, US Protectorates, Ukraine, Venezuela
Shipping and handling
Each additional item
To
Service
Delivery*See Delivery notes
Free shipping
Free
United States
Standard Shipping
Free 2-3 day shippingGet it between Wed, May 22 and Thu, May 23 to 43230
Handling time
Will usually ship within 1 business day of receiving cleared payment.
Select PayPal Credit at checkout to have the option to pay over time.
Qualifying purchases could enjoy No Interest if paid in full in 6 months on purchases of $99 or more. Other offers may also be available.
Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. Minimum monthly payments are required. Subject to credit approval. See terms- for PayPal Credit, opens in a new window or tab
The PayPal Credit account is issued by Synchrony Bank.
The Camco Fold-Away RV Black Grab Handle was exactly as ordered, expertly packaged, shipped and arrived in a most timely manner. Thanks again ShopTuckys for another great E-Bay online shopping experience!